@2013 6Harmonics Inc. All Right Reserved
23
and can be used to trim the RX gain up or down by a few dB without
adversely affecting sensitivity.
7.16 setrxgain command
The “setrxgain” command is to set rx gain.
GWS Cmd >setrxgain 10
7.17 monitor command
The “monitor” command is to start program to monitor status of Node. Typing
“monitor” in the telnet window will initial the program which allows the status of the
radio link to be monitored real time. Below is an example of the parameters which
are displayed.
GWS Cmd>monitor
7.18 setinstaller command
The “setinstaller” command is to record who installed the GWS Node. For US
customers this field is made available to the White Space database and the node
will not be allowed to connect to the database unless there is a valid entry.
7.19 getinstaller command
The “getinstaller” shows who installed the GWS Node
