@2013 6Harmonics Inc. All Right Reserved
17
Attention
:
Modifying the wireless settings are for debug purposes only and
you must be trained by 6Harmonics prior to attempting, otherwise you may
impair performance of the wireless link.
After performing the changes, save it in SSH Shell.
For the changes to take effect you must issue the following commands: a)
wifi down, and then b) wifi up. The new setting will be take effect but these are
not permanent. Once the GWS Node is reset, the changes will be gone and
the default configuration will be loaded from the file.
2. For permanent changes
Open /sbin/config_ap for BTS or /sbin/config_sta for CPE
Attention
:
Modifying the wireless settings are for debug purposes only and you must be trained by
6Harmonics prior to attempting, otherwise you may impair performance of the wireless link.
