4ms Company STS User Manual Download

Page: 4 / 24

File Organization:

• Includes a high-speed 16GB microSD card, loaded with over 200 samples from musicians such as

•

Richard Devine

•

Wobbly

•

Moor Mother

•

Robert Aiki Aubrey Lowe

•

Joseph Pailo

•

Russell E.L. Butler

•

Hugo Paris & Marc Kate

•

Paul Barker

•

Baseck

•

…and more!

• Record new samples directly to banks with the

RECORD

input jacks

• Load WAV files using a computer and the intuitive bank/color organization system

•

Drag folders of WAV files onto the microSD card, and each folder will become a bank

•

No need to rename WAV files

•

Folders starting with a color name will be loaded into that color bank

•

Example "Blue - Frooty Loops" will load into the Blue bank

•

Sub-folders are ignored, only folders in the root directory are scanned for WAV files

• Works best with “UHS Speed Class 3” cards with this symbol printed on the card:

Electrical and Mechanical Specifications

• 20HP Eurorack format module
• 0.98” (25mm) maximum depth
• 10-pin Eurorack power header
• Power consumption (maximums): +12V@145mA; -12V@39mA; +5V rail not used
• Audio

OUT

jacks

•

Out:File = -1.8dB max deviation at 0Hz (DC) - 22kHz

•

21V peak-to-peak = full scale

• Audio

Record

jacks

•

Out:In = max -1.0dB 3Hz-6kHz, -3dB 6k-11k, -7.6dB 11k-20k

•

21V peak-to-peak maximum before clipping

•

End Out

jack

•

+10V trigger pulse

•

13ms pulse width, typical (sample loop time > 17ms)

•

2.75ms pulse width, minimum (at fastest sample loop time = 8ms)

•

1V/OCT

CV jack

•

-5V to +5V range, for -5 to +5 octave shift

•

Note: 1V/oct jack combines with Pitch knob and sample file’s sample rate, and the resulting pitch shift

is limited to -9 octaves down and +4.3 octaves up

• CV jacks (

Start Pos CV

Sample CV

Length CV

)

•

0 to +5V range

•

Add to the position of the corresponding knob

•

Reverse

Play

Rec

jacks

•

Incoming trigger toggles state or starts/restarts feature

•

Trigger voltage must be > 1.6V, rising edge is detected

•

microSD card slot accessible from front panel

•

Edit

button accesses editing/organizational alternative features of some controls (printed in gold lettering)

Page of

Summary of Contents for STS

























Search results

Summary of Contents for STS

Reviews:

Related manuals for STS

Brands by name

Popular brands

4ms Company STS, User Manual

Search results

Summary of Contents for STS

Reviews:

Related manuals for STS

Brands by name

Popular brands