4ms Company STS User Manual Download

Page: 19 / 24

Assigning Samples to Banks and Slots

Re-assigning samples to slots

You can change which sample file is assigned to a bank/sample slot. On the left
side channel, go to the bank and sample slot you want to change. Hold

Edit

and

tap

Next File

(left side

Reverse

). A new sample will play. If you keep tapping

Next

File

with

Edit

held down, it will keep playing new files, scanning the microSD card

for WAV files, and playing them one by one, in this order:

Next File/Previous bank

Next File

: Tap the

Next File

button while holding down

Edit

Previous Bank

: Hold

Edit

Next File

for about two seconds. If you’re in the middle

of a bank, it will go back to the beginning of the bank, and if you're already at the

beginning then it’ll go to the beginning of the previous bank.

Scan All Banks

: Hold

Edit

Next File

continuously. The first file from all banks will

be played, one after another, until you let go.

All the files in the current folder plus the unused files on the card

(left and middle columns of the diagram above) are treated as a

“bank”. This imaginary “bank” is inserted into the normal order of

banks before the White bank. So if you’re in the White bank and

you go back, it’ll go to this “bank”, and if you go back from this

“bank”, it’ll go to the last bank that has samples in it.

The color of the

Next File

button helps you know where you are in the diagram above:

In the first column (all files in the folder) the button will flash the current bank’s color.

In the second column (all unassigned files) the button will be flash dim white.

In the last group (each bank) the button will be the color and blink of the bank you’re in.

You have to save with

Edit

Save

to have the changes take effect after you power the STS off. If you

don’t save, you can hit

Edit+Bank

to restore to the latest saved version without having to

power down.

Page of

Edit

Sample

Edit

Sample

Reverse

Next File

Re-assign current slot:

(Next File)

Edit

Sample

Edit

Sample

Reverse

Next File

Re-assign current slot:

(Previous Bank)

Hold 2 sec

Tip:

Give your finger a break! During
any  of  these  button  presses,
you  can  release  the  Edit  button
at  any  time,  and  pick  back  up
where you left off.

Unused WAV files

(scans entire card)

All samples in all banks

(normal order)

Sample 1 2 3 4 5 6 …

Sample 1 2 3 4 5 6 …
Sample 1 2 3 4 5 6 …

Repeat from start

Files in current folder

(alphabetically)

Summary of Contents for STS

























Search results

Summary of Contents for STS

Reviews:

Related manuals for STS

Brands by name

Popular brands

4ms Company STS, User Manual

Search results

Summary of Contents for STS

Reviews:

Related manuals for STS

Brands by name

Popular brands