background image

Uses for the 

Edit+Next File

 feature 

Being able to re-assign samples to different banks and slots is a powerful feature that allows you to 

organize your samples on the STS even if no computer is available.

Create a bank of samples you want to use for a session.

Change the order of samples within a bank.

Record multiple takes and choose which one you like.

Move new recordings to different banks.

Choose samples you want to use from a folder of more than 10 samples.

Have more than 600 samples on a microSD card and select which ones you want to use without 

using a computer.

Searching for a sample if you can’t remember what bank it’s in.

Assigning samples walk-through 

Let’s do an example. The sample pack that ships with the STS has 15 files in the “Drum Hits 

(Electronic)” folder. Let’s try picking a different sample for the sample slot #1:

1. On the left side play channel, go to the Red bank.

2. Make sure 

Length

 is set to 100% and 

Start Pos

 is 0% in order to listen to the entire sample.

3. We’re going to re-assign slot #1, so turn the left side 

Sample

 knob to 1.

4. Hold 

Edit

 and tap 

Next File

 (left side 

Reverse

 button). A new sample file will play. Notice that the 

left side 

Reverse

 button flashes red (since you’re in the red bank).

5. Hold 

Edit

 and tap 

Next File

 some more times and listen to how it plays a different sample each 

time. When you find one you like, stop hitting 

Edit

+

Next File.

6. That’s it! You’ve now re-assigned the Red bank slot #1 to whatever sample you picked.

Try it out: move the 

Sample

 knob to “2” hit 

PLAY

. Now move it back to “1” and hit 

PLAY

 again: it 

should play the new sample you picked out! You can repeat this process for slot #2 and the rest of the 

Red bank, putting any sample (from anywhere on the microSD card) into any slot.

Like all other 

Edit

 button features, your changes will get lost if you power down without saving. 

(Remember: to save hold 

Edit

 + 

Save

 [left side 

PLAY

] for half a second).

Let’s continue the walk-through and browse all the samples on the microSD Card:

7. Go to a sample slot you haven’t re-assigned yet. Hit 

Edit+Next File

 until the 

Next File

 button 

changes color from flashing red to flashing dim white. The flashing dim white indicates it’s no 

longer scanning the folder, and instead is now scanning the entire microSD card for WAV files that 

aren’t being used in a bank somewhere. The sound that you just heard played was a sample file 

that’s not assigned anywhere.

8. If you keep hitting 

Edit+Next File

 the STS will keep 

scanning the card for unused samples. There are a 

few dozen of these in the sample pack, feel free to 

browse!

9. Once the STS has scanned the entire card (excluding 

sub-folders, of course), it will move on to playing the 

banks. The first bank is White with no blink, so the 

Next File

 button will turn White (no blinks). As you 

keep hitting the button, it’ll play all 10 samples in the 

White bank, then move on to the 10 samples in the 

Red bank, then Orange, etc…

10. If you kept going through all the banks, you would 

end up where you started, playing the samples in the 
original folder (and the 

Next File

 button will flash red 

like it did when you started). At that point you will have played every single WAV file on the 

microSD card (excluding sub-folders, of course).

11. Try going backwards: hold down 

Edit

 and 

Next File

 for 2 seconds. If you’re in the middle of bank 

or group, the STS will go to the start and begin playing the first sample. If you hit it again (or keep 

holding it down) it will go back a bank/group and play the first sample of the previous bank/group. 

If you hold it down for a while, it’ll scan all the first files in every bank.

Page   of 

20

24

Tip:

 

When  you  first  hit  Edit+Next  File,  it 
starts  scanning  the  folder  of  the 
sample that’s currently assigned to the 
slot. But— if you assign a new sample 
from  a 

different

  folder  to  the  slot,  the 

next time you hit Edit+Next File on that 
slot,  it’ll  start  you  in  the  new  assigned 
sample’s  folder.  Keep  in  mind  the 
position  of  Edit+Next  is  retained  until 
you  change  banks,  so  this  only 
happens  if  you  leave  the  bank  and 
come back.

Summary of Contents for STS

























Reviews: