4IPNET WHG315, User Manual

Page: 326 / 368

User’s Manual
WHG Controller / HSG Gateway ENGLISH
326
External Interface (WAN1) that will change dynamically if WAN1 Interface is Dynamic. When Assign WAN IP
Automatically is checked, the entered Internal IP Address under will be bound to the WAN1 interface. Each
Static Assignment could be bound with the chosen External Interface, WAN1 or WAN2. There are specific
sets of static Internal IP Address and External IP Address available. Internal and External IP Addresses
are entered as a set. After the setup, accessing the WAN will be mapped to access the Internal IP Address.
These settings will become effective immediately after clicking the Apply button.
Public Accessible Servers
Public Accessible Servers allow the administrator to set virtual servers, so that client devices outside the managed
network can access these servers within the managed network. Different virtual servers can be configured for
different sets of physical services, such as TCP and UDP services in general. Enter the
“External Service Port”
,
“Local Server IP Address”
and
“Local Server Port”
. Select
“TCP”
or
“UDP” for the service’s type. In the
Enable column, check the desired server to enable. These settings will become effective immediately after clicking
the Apply button.
Port & IP Forwarding