4IPNET WHG315 User Manual Download Page 119

Page: 119 / 368

User’s Manual

WHG Controller / HSG Gateway

ENGLISH

119

To Upload a Certificate/Private Key/Intermediate CA, click “Browse”, select the

appropriate files, and click Upload Files.

8.3.2. Internal Root CA

The administrator can upload an Internal Root CA, or generate a root CA for private

use. The created root CA certificate can be downloaded and used to sign certificates

generated by the system. Note that the system only allows one Internal Root CA to

be created.

To upload an Internal Root CA, click browse to select the Certificate and matching

Private Key from your local disk, and click "Upload Files".

Summary of Contents for WHG315

















































































































































































































































































































































































Search results

Summary of Contents for WHG315

Reviews:

4IPNET WHG315, User Manual, Page: 119 / 368

Search results

Summary of Contents for WHG315

Reviews: