4IPNET WHG315, User Manual, Page: 220 / 368

User’s Manual
WHG Controller / HSG Gateway ENGLISH
220
WAN2 to the external network, such as the ADSL Router from your ISP (Internet
Service Provider).
5 LAN1~ LAN8 Eight Gigabit LAN ports for servicing LAN traffic (10/100/1000 Base-T RJ-
45).
6 USB Function Reserved for future use.
7 Console The system can be configured via a serial console port. The administrator
can use a terminal emulation program such as Microsoft’s Hyper Terminal
to login to the configuration console interface to change admin password or
monitor system status, etc.
WHG321 Hardware
1 Reset Press and hold the Reset button for about 5 seconds and status of LED on
front panel will start to blink before restarting the system.
Press and hold the Reset button for more than 10 seconds and status of
LED on the front panel will start to speed up blinking before resetting the
system to default configuration.
2 Console The system can be configured via a serial console port. The administrator
can use a terminal emulation program such as Microsoft’s Hyper Terminal
to login to the configuration console interface to change admin password
or monitor system status, etc.
4 USB1/USB2 Reserved for future use.
5 WAN1/WAN2 Two Gigabit WAN ports (10/100/1000 Base-T RJ-45) for uplink connections
to the external network, such as the ADSL Router from your ISP (Internet
Service Provider).
6 LAN1 ~ LAN2 Two Gigabit LAN ports for servicing LAN traffic (10/100/1000 Base-T RJ-
45).
7 LED
Indicators
There are two LED indicators, Power and Status , to indicate different
status of the system.
WHG325 Hardware
1 LCD Display Allows network administrator to check important system settings such as
network interface, SZ configurations, etc. The navigation buttons from left
to right respectively are “Esc”, “Up”, “Down”, and “Enter”.
2 Reset Press and hold the Reset button for about 5 seconds and status of LED on
front panel will start to blink before restarting the system.