Hacousto Holland bv
Industrieweg 87
2651BC Berkel & Rodenrijs
4EVAC Compact 500 quick guide
DoP OD 16.47
Author:
DD
Design revision:
2.0
Page 10 of 33
6.
Connect the battery leads in order FROM (+) TO (-), as follows:
a.
First, connect the (+) lead (long red) to the positive (+) pin of battery A;
b.
Next, connect the (-) lead (long black) to the negative (-) pin of battery B;
7.
Check the voltage of each battery again, separately, and the total voltage of both batteries.
8.
Cover all battery terminals with insulating rubber caps.
9.
Put the thermal sensor inside one of the rubber pads, so that it has good thermal contact with the
battery terminal.
10.
Fasten the thermal sensor to the battery lead with a tie-wrap.
11.
Secure the battery mechanically:
a.
Fix the bottom bracket,
b.
Twist the red plastic wing-nut hand-tight.