Hacousto Holland bv
Industrieweg 87
2651BC Berkel & Rodenrijs
4EVAC Compact 500 quick guide
DoP OD 16.47
Author:
DD
Design revision:
2.0
Page 6 of 33
Caution! Never mount or un-mount the cabinet with battery inside!
6.
Installation
Caution! Risk of electric shock! Keep the mains switch OFF or unplugged from the mains outlet during
the entire installation process. Do not install or uninstall any parts of the system while the mains voltage is
on.
Open the cabinet
In order to open the cabinet, follow the steps below:
1.
Find two round openings in the front top part of the cabinet, where fixing screws are placed.
2.
Undo both screws using a hex key (also known as Allen wrench or in-bus).
3.
Hold both the left and right top corners of the front door.
4.
Open the front door by pulling back the top of the front door. Try to pull both the left and right
side simultaneously with the same force.
5.
Slowly keep opening the front door until it tilts 180°
6.
Leave the front door hanging freely upside-down.
7.
Inside the cabinet, locate the hinges on the left and right side of the backplate: Check if the cabinet
hangs properly on the wall bracket.