VISIX S-Series Network Camera
|
USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
51
3.
Select the region from the dropdown list for detection settings.
4.
Click the
button to begin drawing the region.
5.
Click on the live video to specify the four vertexes of the detection region. Right click to complete the
drawing. Repeat the steps to configure other regions. Up to 4 regions can be set. The user can click the
button to clear all pre-defined regions.
6.
Set the detection target for the region entrance detection.
The user can select human, vehicle, or all
(human & vehicle) as the detection target. If human is selected, only human beings will be identified as
detection objects, etc...
7.
Click the
tab to enter the arming schedule setting interface. The time schedule
configuration is identical to configuring an arming schedule for motion detection. Refer to
Section
5.2.1
Configuring Motion Detection
for more details.
8.
Click the
tab to select the linkage method taken for the video loss alarm. Notify
surveillance center, send email, upload to FTP, trigger channel, smart tracking and trigger alarm output
are selectable. Refer to
Section
5.2.1 Configuring Motion Detection
for more details on configuring
linkages.
9.
Click the
button to save the settings.