VISIX S-Series Network Camera
|
USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
43
2.
Select one alarm output channel in the
Alarm Output
dropdown list.
3.
Set a name in
for the alarm output (optional).
4.
The
Delay
time can be set to
5sec
,
10sec
,
30sec
,
1min
,
2min
,
5min, 10min
or
Manual
.
The delay time
refers to the time duration that the alarm output remains in effect after alarm occurs.
5.
Click the
tab to enter the arming schedule setting interface. The time schedule
configuration is identical to configuring an arming schedule for motion detection. Refer to
Section
5.2.1
Configuring Motion Detection
for more details.
Figure 5-19
Alarm Output Settings
6.
If desired, copy the settings to other alarm outputs.
7.
Click
to save the settings.
HANDLING EXCEPTIONS
Available exception types: HDD full, HDD error, Network disconnected, IP address conflict and Illegal camera
login.
Steps:
1.
Enter the Exception settings interface: Configuration > Event > Basic Event > Exception
2.
Check off the corresponding checkbox for desired Exception alarm linkages. Refer to Section
5.2.1
Configuring Motion Detection
for details on configuring linkage methods.