3onedata MES600 Series User Manual Download Page 59

Page: 59 / 76

Industrial Ethernet Switch User Manual

3onedata proprietary and confidential

the filter or forward the data frame corresponding to the switch port. MAC address

table is the basis and premise of the switch to achieve fast forwarding.

MAC address classify into three types in device address MAC address list:



Dynamic MAC address

Dynamic MAC address of the switches in the network through the data frame to

learn, when the arrival of aging time will be deleted. When the device is

connected to the switch port to change the MAC address table and port

corresponding relationship will change accordingly. Dynamic MAC address of the

switch is powered restart will disappear, the need to re-learn.



Static certification (solidify) MAC address

Static authentication MAC address by configuring IEEE 802.1x authentication,

the switch will not be aging. Regardless of the device is connected to the switch

port happen to the MAC address table MAC address and port corresponding

relationship always will not change, the relationship is completely controlled by

the IEEE 802.1X authentication server. Static MAC address after the switch is

powered restart will disappear.



Permanent static MAC addresses

permanent MAC address generated through configuration will not be aging,

regardless of the device is connected switches of the change of the port, the

MAC address table of MAC address and port of corresponding relation is always

does not change, permanent MAC address does not disappear after the switch

is restart

MAC address table can specify the sort type, can choose "auto" and "MAC" two sort

types, MAC address and related forwarding port will be showed in this table. if the

status bar displays "certification"

，

shows MAC address static certification that is not

aging treatment, if displays “static” means that MAC address is a permanent static

address that is not aging treatment.

Notes:

Summary of Contents for MES600 Series













































































Search results

Summary of Contents for MES600 Series

Reviews:

Related manuals for MES600 Series

Brands by name

Popular brands

3onedata MES600 Series, User Manual

Search results

Summary of Contents for MES600 Series

Reviews:

Related manuals for MES600 Series

Brands by name

Popular brands