3onedata MES600 Series User Manual Download Page 27

Page: 27 / 76

Industrial Ethernet Switch User Manual

3onedata proprietary and confidential

3. VLAN configuration

：

VLAN identification replace configuration:

Manage VLAN ID

：

There must have members in VLAN, can access switch regularly through VLAN group

members.

For example: If configure VLAN to VLAN2, it must have members (Like as port 2 and

port3), then port 2 and port 3 can access switch regularly.

Port VID

：

The default configuration of port VID



Keeping the same VID

If data did not have VLAN mark, created VLAN mark with default priority and port

VID and add to data frame, priority did not change. If data have VLAN mark, the

data frame did not change, priority did not change.



Replace identification VID with default VID

If data did not have VLAN mark, created VLAN mark with default priority and port

VID and add to data frame, if data have VLAN mark, VLAN mark

’s VID will be

replace by default port VID

For example: Set port 2 and port 3 into VLAN2, PVID is 2, port 4 and port 5 into VLAN

3, PVID is 3, Choice

” Keep VID and priority”, then port 2 and port 3 can

communication, port 4 and port 5 can communicate, port 2 and port 3 cannot

communicate with port 4 and port 5.

Summary of Contents for MES600 Series













































































Search results

Summary of Contents for MES600 Series

Reviews:

Related manuals for MES600 Series

Brands by name

Popular brands

3onedata MES600 Series, User Manual

Search results

Summary of Contents for MES600 Series

Reviews:

Related manuals for MES600 Series

Brands by name

Popular brands