User manual
29
MAC address is in canonical format.
VLAN ID:
a 12-bit field specifying the VLAN to which the frame belongs. The hexadecimal values of 0x000 and
0xFFF are reserved. All other values may be used as VLAN identifiers, allowing up to 4,094 VLAN.
1. The type of port’s Line
IES618-4D series support 2 type port lines:
Access:
Port belongs to 1 VLAN, normally, it used for connecting user device, default all port is access port.
Trunk:
Port belongs to some VLAN, can transmit and receive some VLAN message, normally, it used for
connection of network device.
2.
Deal with transmit and receive message
Type
Receive message
Message did not take Tag
Message take Tag
Access
Put the VLAN tag point to Port default
VLAN ID for message
Put the VLAN tag point to Port
default VLAN ID for message
Trunk
Put the VLAN tag point to Port default
VLAN ID for message
Keep up VLAN ID, no need replace
Type
Transmit message
Unmodify
Did not modify when transmit, the data packet is the same as enter into switch
Untagged
Did not take the mark when transmit
Tagged
Take the mark when transmit
Unmodify:
No need to modify original VLAN mark
Untagged
：
It is a normal Ethernet message
Tagged
：
Added a 4 bytes VLAN information after original MAC address and destination MAC address
3. Parameter item description
Item
Description
PVID
Port‘s LAN ID, value range : 1
～
4095
VID
VLAN ID number, value range: 1
～
4095
Power type
Include Access and Trunk
Member type
Unmodify, Untagged, Tagged
Modify all
Quickly modify the type of all members at the same time
Add
Add the configuration VLAN into VLAN table
Delete
Choice one VLAN in the table, knock<Delete>, delete VLAN
The default VLAN, all port are Access, PVID: 1, all belong to the members of VLAN1
4. Create VLAN
The step is as follows:
1. Enter into VLAN configuration interface, firstly select port type, Access or Trunk;
2. Input the default PVID of the port in [PVID] text box;
3. Input appointed VLAN into [VID] text box;
4. Set up members‘ type of each port: Unmodified, Untagged, Tagged
5. Click [Add] button, add VLAN items into the table and click [Apply] and reboot the device. Then creating
new VLAN is finished.
As follow figure 5.6.1, create VLAN1, port type: Access, member type: Untagged, member included
CPU port and port 1~4. Create VLAN2, type of port 5, 6: Access, member type: Untagged
，
type of port 7, 8: