User manual
11
the inlet and outlet holes. Cables should be banded and fixed when they are out of the groove;
7.
User cable should be separated from the power lines. Cables, power lines and grounding lines
cannot be overlapped and mixed when they are in the same groove road. When cable is too long,
it cannot hold down other cable, but structure in the middle of alignment rack;
8.
Pigtail cannot be tied and swerved as less as possible. Swerving radius cannot be too small
(small swerving causes terrible loss of link). Its banding should be moderate, not too tight, and
should be separated from other cables;
9.
It should have corresponding simple signal at both sides of the cable for maintaining.