User manual
19
（
Figure 5.3.3
）
5.3.2.2 Port information
IES618-4D series a total of 8 ports, ports can confirm whether the port with the equipment complies with
the information bar. Equipment at work, via the port status of the port information in the status view, for
example in the figure below you can see port 4 is LINK and port connection status status as FULL, speed is
100M and port type for the TX(RJ45). As shown in Figure 5.3.4.
LINK
：
Indicates that the port is in a connected state
；
LOS
：
Indicates that the port is not connected
；
FULL
：
Indicates that the port State is full duplex
；
HALF
：
Indicates that the port State is half-duplex (if the ports are not connected, the port status is HALF)
；
（
Figure 5.3.4
）
5.4 Serial device server
Server configuration includes the serial port configuration and mode of operation of the configuration
parameters
5.4.1
、
Configure serial port parameter
Serial port configuration menu
Optional data
Description
Serial port working mode
RS-232 full duplex/RS-422 full
duplex/RS-485 half duplex
Serial work mode
Baud rate
（
bps
）
300-115200
（
10pcs band rate
Baud rate choice