© 3M 2010. All Rights Reserved.
9
3M™ SCP700 Series Mobile Stand
Assembly and Installation Guide
Step 1.
Unpack the shelf items from the packaging.
Step 2.
Slide one (1) brass washer down the length
of the shelf pole.
Step 3.
Slide one (1) shelf down the length of the
pole.
Step 4.
Once the shelf is resting at the end of the shelf
pole, insert one (1) set screw into the shelf and
tighten using the 5/32 in. Allen wrench.
Step 5.
Lay the stand flat on the ground.
Step 6.
Slide the assembled unit into the back support
assembly (the mounting hole is located on the
underside of the support assembly).
Shelf Assembly (Optional)
Shelf
Brass Washer
Shelf Pole
Set Screw
Step 7.
Once the shelf assembly has been inserted all the way into
the support assembly, secure shelf assembly using two (2)
set screws and then tighten with the 5/32 in. Allen wrench
(supplied).
Step 8.
To adjust the height of the shelf, loosen the set screws,
raise or lower the shelf to the desired height, and then re-
tighten the set screws.
The mounting holes for the
set screws are located on
the left hand side of the
support assembly.
Support Assembly
Shelf
Set Screw
Allen Wrench (5/32 in.)
Summary of Contents for SCP716W
Page 22: ...meetings mmm com ...
