background image

© 3M 2010.  All Rights Reserved.

 

3

3M™ SCP700 Series Mobile Stand 

Assembly and Installation Guide

Warranty; Limited Remedy; Limited Liability

The 3M SCP700 Series Mobile Stand (the “3M Product”) is warranted to be free from defects in material or manufacture for a 

period of one (1) year from the date of purchase.

THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE OF ANY AND ALL WARRANTIES, EXPRESS 

OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 

FOR A PARTICULAR PURPOSE, OR ANY INDUSTRY PRACTICE OR CUSTOM OR TRADE USAGE. 

In the event the 3M Product fails to conform to the above stated warranties within the applicable warranty period, your 

exclusive remedy shall be, at 3M’s option, to replace or repair the 3M Product or to refund the purchase price of the 3M 

Product.  All replaced parts or products become property of 3M.  If the product is repaired, 3M will repair the defective part(s) 

with a new or used part(s). If the 3M Product is replaced, 3M will replace the 3M Product with the same or equivalent model 

and with a new or refurbished 3M Product.  In the case of an approved warranty claim, the replacement 3M Product will carry 

only the remaining term of the original 3M Product’s warranty period as stated above. For warranty service, you must provide 

proof of the date of the original purchase else the manufacturing code date will be used to establish the start date of the 

warranty.  The following are exclusions to the above listed warranty:

a. 

This warranty does not cover 3M Product that is modified or damaged through improper storage, misuse, abuse, accident, 
vandalism, improper installation, neglect, improper shipping, damage caused by acts of war, disasters such as fire, flood, and 
lightning, improper electrical current, software problems, interaction with non-3M products, or service other than by a 3M Authorized 
Service Provider, neglect or mishandling by any person.  Normal wear and tear is not covered under warranty.

b. 

3M Product is designed to operate in the typical indoor environment.  This warranty does not cover 3M Product used outside of the 
following circumstances:

 

      • 16°C - 29°C  (60°F - 85°F)

c. 

This warranty does not cover any additional costs including, but not limited to, those associated with removal, cleaning or 
installation of the 3M Product and adjustments  made to the 3M Product.

d. 

This warranty is not transferable.

e. 

3M is not responsible for warranty service should the 3M label or logo or the rating label or serial number be removed unless 
otherwise stated in writing for the purpose of private labeling for partnership requirements.

f.  This warranty does not cover postage, insurance, or shipping costs incurred in presenting your 3M Product for warranty service. 

Said costs are the customer’s responsibility. If a claimed defect cannot be identified or reproduced in service, the customer may be 
held responsible for cost incurred.  Should your warranty upgrade include a “change out” service and the claimed defect cannot be 
identified or reproduced by the technician, the customer will be responsible for call out costs.

FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE 3M PRODUCT MANUAL OR FAILURE TO USE 

THE 3M PRODUCT IN ACCORDANCE WITH 3M’S INTENDED USE STATEMENT, WILL VOID ALL WARRANTIES AND LIMITED 

REMEDIES.

EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL, 3M SHALL NOT BE LIABLE FOR ANY 

INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, 

REVENUE OR BUSINESS) RESULTING FROM, OR IN ANY WAY RELATED TO PERFORMANCE, USE OR INABILITY TO USE 

ANY OF THE 3M PRODUCT.  This limitation applies regardless of the legal theory upon which damages are sought.

For warranty support, please call or write your local 3M office or a 3M Authorized Service Provider to obtain RMA # (Return 

Material Authorization Number) before returning the product.  If you are inside the Continental United States of America, 

please contact 3M Customer Service at 800-328-1371 or email [email protected].

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be 

reliable, but the accuracy or completeness is not guaranteed.  Before using this product, you must evaluate it and determine 

if it is suitable for your intended application.  You assume all risks and liability associated with such use.  Any statements 

related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your 

purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Summary of Contents for SCP716W























Reviews: