© 3M 2010. All Rights Reserved.
5
3M™ SCP700 Series Mobile Stand
Assembly and Installation Guide
NOTICE:
•
To reduce the risks associated with impact:
-
Mount only 3M approved products ( listed in the assembly instructions ) on the mobile stand.
-
Do not pull down on the upper hanger, lower hanger or back plate support (compressing the gas strut) before
attaching the whiteboard to the stand.
-
Always provide proper adult supervision when using the mobile stand around children.
-
Do not climb on, hang on, or place any added weight on the mobile stand other than the 3M
approved projector mounts and applicable 3M approved projectors and white boards.
-
Before moving the stand:
- Collapse, fold, and secure arm
- Lower and lock the stand into the lowest position.
- Use 2 people to move the stand
-
Inspect the mobile stand and mounts periodically to ensure all fasteners remain tight and that no damage has
occurred. Replace all damaged parts found prior to further use.
-
If gas shock fails, do not operate, call your servicing dealer.
-
Do not use the mobile stand with a damaged caster or damaged caster lock
-
Do not modify the mobile stand or mounts in any way and use only 3M approved replacement parts.
-
Do not use an extension arm exceeding a maximum of 51 inches as measured from the mobile stand mountng
plate to the center of the ball on the wall mount.
-
Do not exceed a maximum screen size of 96 inches.
-
Do not exceed a maximum total weight on cart of 145 lbs. including board, wall mount, projector, and shelf
contents.
•
Read, understand and follow all safety information contained in the Assembly/Installation Guide prior to use.
•
To reduce the risks associated with pinch points:
-
Use care when assembling the stand.
•
To reduce the risks associated with lifting:
-
Do not stand on the mobile stand to assemble components
-
Always lock the rear casters.
-
Use two experienced installers for installation of all mounts to the mobile stand per the Installation Guide due to
weight and to handling concerns.
•
To reduce the risks associated with tripping:
-
Position and secure the cords to prevent tripping.
-
All power and signal cables must be disconnected from the wall prior to moving the cart.
•
This cart is designed for indoor use only.
Summary of Contents for SCP716W
Page 22: ...meetings mmm com ...
