6
7
GB
8:1 CLEANING
Clean/disinfect the shells, headband and ear cushions regularly with soap and warm water.
Note:
Do not immerse in water or fluids.
8:2 REMOVING/REPLACING EAR CUSHIONS
(E)
Slide your fingers under the edge of the ear cushion and pull straight out.
Insert a new ear cushion by pressing until it snaps into place.
9. SPARE PARTS/ACCESSORIES
HY79 Hygiene kit
Easily replaceable hygiene kit consisting of two attenuation cushions, two foam rings and snap-in ear cushions. Replace at
least twice a year to ensure consistent attenuation, hygiene and comfort!
HY100A Clean – single-use protectors
A single-use protector that is easy to apply to the ear cushions. Package contains 100 pairs. The fitting of hygiene covers to
the cushions may affect the acoustic performance of the earmuffs.
HYM1000 Mike Protector
Moisture and wind-proof with hygienic tape. Protects the speech microphone and enhances its life span.
Package of 5 meters for about 50 replacements. Contains natural latex, not recommended for use by sensitive persons.
M40/1 Wind shield for MT7-type speech microphones
Effective protection from wind noise. Enhances the life span and protects the speech microphone.
One per package.
M60/2 Wind shield for ambient microphones
Effective protection from wind noise. One pair per package.
MT7N-02 Dynamic microphone
Microphone boom with dynamic microphone.
ACK053 Rechargeable battery pack
Rechargeable NiMH Battery pack, 2500 mAh.
1180 SV Battery lid
Battery lid for the use of 1.5 V batteries type LR6 (AA) (One lid is included in the package on delivery.)
FR09 Battery charger
Battery charger for the Peltor ACK053 accumulator battery.
Flex Connecting cable
Please contact your 3M Peltor dealer!
WARRANTY
The warranty does not cover any damage caused by neglected maintenance
or careless handling. For more information on maintenance, please see the user instruction.
For complete warranty condition, contact your dealer or local 3M office.
The
Bluetooth®
word mark and logos are registered trademarks owned by
Bluetooth
SIG, Inc. and any use of such
marks by 3M is under license. Other trademarks and trade names are those of their respective owners.
3M does not accept liability of any kind, be it direct or consequential (including, but not limited to, loss of profits, business
and/or goodwill) arising from reliance upon any information herein provided by 3M. The user is responsible for determining
the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3M’s
liability for death or personal injury arising from its negligence.
Summary of Contents for Peltor WS ProTac XP MT15H7 WS5 Series
Page 178: ...176 ...
