Bair Paws Model 875 Warming Unit Service Manual
12
Check the 3M
TM
Bair Paws
TM
system website to ensure you have the most recent version of this document.
www.bairpaws.com reorder #202036A
Mounting the Warming Unit with a Suction Wall Mount Adapter
1�
Slide the Bair Paws suction wall mount
adapter into the suction wall bracket� If the
adapter is too large to fit, remove the expand
spacer�
2�
Increase the expander on the Bair Paws
suction wall mount adapter by gently turning
the screw counter clockwise until the adapter
is securely fastened (torque < 10 in-lbs)� The
adapter should not be able to move in any
direction within the suction wall bracket once
fastened�
CAUTION:
Overtorquing may cause device
damage�
WARNING:
To prevent pinching, only hold the front of
the adapter when increasing
decreasing the expander�
3�
Slide the Bair Paws 875 warming unit into the
suction wall mount adapter�
Figure 6� Mounting the warming unit
with a suction wall mount adapter�
