Bair Paws Model 875 Warming Unit Service Manual
8
Check the 3M
TM
Bair Paws
TM
system website to ensure you have the most recent version of this document.
www.bairpaws.com reorder #202036A
Placing the Warming Unit on the Wall-mount Bracket
1� Snap the warming unit into position by sliding the clip on the back of the warming unit
into the groove of the wall-mount bracket� The assembly will click when the clip is fully
seated in the wall-mount bracket�
2� Lift the warming unit straight up to remove it from the wall-mount bracket�
Note: It may be necessary to gently strike the case bottom in an upward fashion with
the palm of your hand to release the clip from the wall-mount bracket�
Figure 2� Inserting the warming unit into the groove of the wall-mount bracket�
Wall-mount
bracket
Case bottom
