![background image](http://html1.mh-extra.com/html/3m/anie-jooltool/anie-jooltool_user-manual_443955011.webp)
ALWAYS use light, gentle pressure when working.
NEVER
use excessive pressure on the disc, the spindle or any attached accessory while using the tool.
ALWAYS work on workpieces of a hand-manageable size or use a proper holding accessory.
NEVER
work on workpieces that may get stuck between the Backpad and Hood accessory.
ALWAYS use accessories and attachments for their intended applications.
ALWAYS use only JOOLTOOL
™
-approved accessories with this JOOLTOOL
™
unit.
NEVER
use the tool with any accessories that seem damaged or excessively worn.
If in doubt, turn the tool “OFF” IMMEDIATELY and inspect thoroughly. Replace any badly worn or broken accessories.
ALWAYS pay close attention around rotating wheels or discs.
Moving parts may cause injury.
NEVER try to stop the discs or wheels with your hands or with any object.
Spinning disc may cause injury.
ALWAYS
let the tool to come to a complete stop BEFORE changing attachments or accessories.
USE & MAINTENANCE
PROPER OPERATION & CARE OF YOUR TOOL
ALWAYS
make sure electrical connections and switch are clean and dry BEFORE powering the
JOOLTOOL™
Wet or Damp connections or electrical components may result in electrical shock, injury or death.
NEVER
attempt to clean by inserting rigid objects through openings or electrical connections.
Anie designed the
JOOLTOOL™
System to bring you years of service without requiring maintenance.
If your unit needs special attention, it should only be performed by an authorized service center or
directly by the manufacturer,
JOOLTOOL™
.
NEVER attempt to repair or service any part of the tool yourself.
Doing so may result in damage to the unit and accessories, electrical shock, injury or death.
NEVER
use cleaning agents/solvents that may damage plastic parts: gasoline, ammonia-based cleaners,
chlorinated solvents, carbon tetrachloride (brake cleaner), some paint thinners and others.
For best visibility and control, work WITHIN
the SEE-THRU™ area of your spinning Backpad.
PLEASE USE COMMON SENSE WHEN WORKING ON THE
JOOLTOOL™
SYSTEM
If you are not sure how to accomplish a particular task, please consult us
BEFORE
starting your project.
Stay within the Jooltool’s designed limits to achieve great results as well as a safe & enjoyable experience.
MAINTENANCE
CLEANING
ANIE’S TIP:
CLEAN YOUR JOOLTOOL REGULARLY TO KEEP YOUR WARRANTY VALID.
Although the JOOLTOOL is designed to work as cleanly as possible, the warranty does not cover
neglect. Ex: failure to discard excess dust collected near or in the motor shaft/bearings.
NOTE:
ALWAYS
wear
EYE PROTECTION
when using compressed air for cleaning.
The removable
HOOD
can be washed with soap & water.
ALWAYS
remove the
HOOD
before washing!
ALWAYS
Dry the
Hood
before re-installing onto the
JOOLTOOL™.
ALWAYS
disconnect power from the tool before cleaning the JOOLTOOL System or Accessories.
Wipe clean with a cotton rag or soft brush.
The JOOLTOOL automatically directs dust and sparks
toward the VACCUUM PORT. For a cleaner and safer work area,
use a firmly-secured, strong dust collection (vacuum) system.
JOOLTOOL VACCUUM
Item# V-FW11
Toll Free: 1-85-JOOLTOOL
p.11
Buy supplies at WWW.JOOLTOOL.COM