ANIE’S TIP:
For a super polish on Hard Glass, use PREMIUM DIAMOND
(See
p. 18
. LAPIDARY HARD-STONE/GLASS, Steps 3-4)
STEP 1
VERY FAST GRINDING & SHAPING of your piece
Use
3M
Flex-Diamond
(X COARSE ) abrasive
for VERY AGGRESSIVE material removal.
Speed:
High speed with water
STEP 1b (ALTERNATIVE)
Use
3M
Microfinishing Diamond
(COARSE) abrasive
for more gradual material removal.
Speed:
High speed with water
ALTERNATE FINAL STEP:
POLISHING
You can also use
3M
Cerium Oxide
to get a
final polish. Try this after step
2c
.
WARNING:
Do NOT use on porous surfaces
Speed:
Very Slow (with a lot of water)
FOLLOW FROM
TOP TO BOTTOM
STEP 2
REFINE the shape and remove scratches:
Use
3M
Microfinishing Diamond
abrasives
to finalize the shape and remove any leftover scratches.
STEP 2b (ALTERNATIVE)
Use for more gradual scratch removal.
Speed:
Medium speed with water
1
3
ALTERNATIVE STEP
3
X COARSE
I
tem # D-36074-1
1
MEDIUM
Item # D-3045-2
2a
VERY FINE
Item # D-3020-2
2c
2c
ENAMEL / FUSED GLASS
Toll Free: 1-85-JOOLTOOL
p.25
Buy supplies at WWW.JOOLTOOL.COM
COARSE
Item# D-3074-2
1b
ALT
ALT
FINE
Item# D-3030-2
2b
ALT
FINAL STEP:
Cerium Oxide
Item # AT-13000-2
3
FELT DISC
I
tem # B-301
2
3
Apply CUSHIONS to BACKPADS.
FELT & BUFF don’t need cushions.
Apply abrasives onto BACKPADS
(with the CUSHIONS applied).
Use Water Tray to apply water to the
workpiece during every step.
SETUP
1
2
3
SAFETY FIRST!
Always wear eye
and respiratory
protection.
FOLLOW THESE STEPS TO TAKE ENAMEL FROM ROUGH TO A HIGH POLISH
Use with COMPOUND
Item#: C-103
+
FINAL STEP
HIGH-POLISH your piece:
Glass can be polished easily with the
FELT DISC.
Speed:
High Speed. DO
NOT
USE WATER
TO REMOVE SCRATCHES OR CHIPS
CLEANING:
Clean abrasives with damp cloth for longer life & performance.
Repairing scratched or chipped pieces is similar to working on rough glass.
For DEEP Scratches: Start at
Step 2b
, then continue up to
FINAL STEP (3) or
For LIGHT scratches, try the polishing steps directly:
FINAL STEP (3) or
ANIE’S TIP:
To avoid scratches on finished piece, follow ALL steps THOROUGHLY & inspect your piece after each step.
2b
3
3
ALT
3
ALT
3
FOR LAMP WORK
SHAPING & POLISHING STEPS