Pag. 24
DUALNET-6 MANUAL
ENGLISH
.
13 . ALARM REPORTS
Enter in the main menu and go to
“Alarm History”
Press the key
On the display you will see:
By pressing the key the display will show number date and hour of the event.
With the keys or the end user or installer may go up and down in the event log. The
smallest number indicated the last event. You may go up and down in the event log also with the key
. At the end press to return to the main menu.
00:
00 Tamper
00
= is the number of the event
00 Tamper = is the zone in which
the Tamper is triggered.
E
00: 10.08
12:00AM
00
= Number of the event
10.08
= Date of alarm trigger
12:00 AM = Hour of alarm trigger
#
E
On the display will appear:
To memorize To Cancel
With the keys or select “
Activate sensor
” to learn a sensor’s code.
If the panel memorizes the code the display will show “Memorized” if it
does not it will show “Failure”. Press the key and repeat the
above procedure
From a distance of about 5 mt.
from the keypad and within 20
seconds, send a transmission,
from the sensor.
E
If you desire to cancel a wireless sensor select with the keys
or “Delete sensor” Delete Memorized sensor will
appear. Press to cancel.
Press to proceed
E
E
If the sensor code has been previously memorized, on the display
will appear “Update ?” By pressing the sensor code will moved
to a new position and memorized.
NOTE:
If the password is in the same position, it may be cancelled.
If this takes place it must be again memorized.
Press once again if you wish to memorize additional Peg-3
transmitters otherwise press to return to the main menu.
ActivateSensor
Delete Sensor
ActivateSensor
Learning
Success
ActivateSensor
Failure
00SensorExists
Update?
ActivateSensor
Delete sensor.
Deleting Sensor
Success
E
Al
Program Sensor
arm History
#
E
