Pag. 19
DUALNET—6 INSTRUCTION MANUAL
ENGLISH
09. ATTRIBUTING THE ZONES
Enter the programming menu and go to the window
“Zone Attribute”
Press the key
On the display will appear:
To select the zone number to which you wish to attribute the sensor, you must press the key
and digit the number of the zone from 01 to 44 (you must always press 2 numbers). After the zone
has been selected on the display will appear the zone selected. Then press to confirm and on
the display will appear:
With the keys or select the group of belonging **; then press the key to proceed
with the next display window (see the factory settings on table 1)
To select the type of sensor you must press and digit the corresponding number.
Follow the table 2 and 3 on the following page (insert a number between 00 and 15). At the end
press key to proceed to the next window.
With the keys or select if the zone must be bypassed or not and then press the key
to proceed to the next window.
With the keys or select if the zone must be delayed or not, then press the key if
you desire to proceed to the next window or press the key to return to the previous menu.
Zone Number
01
E
Zone Type
2 1 0
** Group Belonging:
0 = 24 hour
1 = Night arming (only parametric)
2= Day Arming (total)
E
Sensor Type
01
E
Bypass Zone?
YES NO
E
Entry Delay?
YES NO
E
#
E
Zo
PSTN Failure
ne Attribute
