37
36
3DISON H700
User Manual V.1
3DISON H700
User Manual V.1
WiFi Camera
⑤
You can check an image in real time by clicking
the added camara to ‘VsCam app’.
NOTE :
●
The wireless connection may generate a
problem if the Internet router SSID (wireless
network name) is inputted with special
characters, Hangul and/or word spacing,
so you must check the SSID when connecting.
●
PIN may be changed after installation.
●
About two minutes of booting time is required after removal of LAN cable connected
to the camera.
●
When the wireless SSID is not set with PIN, simply click OK button without inputting
the PIN.
③
Enter
Add Camera
after execution of the pro-
gram to input UID number attached to a rear sur-
face of body, and input an initial PIN (personal iden-
tification number) 888888.
②
Install the
IP Camera Super Client
by executing
the CD enclosed in the product.
①
Connect the Internet router to WIFI Camera via
LAN cable. About one minute of booting time is
required.
2. Connecting to your computer
Annex2. Extra Features
(Laser Engraver / WiFi Camera / Embedded Battery)
WiFi Camera
Embedded Battery
④
Connect the camera to the program by double
clicking IP Camera on the right. Once you have
checked the connection, Click a button at right of
mouse to select
[Camera Options].
Embedded battery prevents emergent situation which is unexpected stopping supply of
electricity during printing. Continuous printing without stopping is possible even if
the power cord is pulled off by mistake or in case of sudden blackout.
⑤
Click
[Set WIFI]>[Search Signals]
on the option
screen. Select currently used wireless
SSID
> click
[Set]
button > click
[OK]
button after inputting PIN.
Once the message saying to disconnect LAN Cable
appears, disconnect.
NOTE :
●
The wireless connection may generate a problem if the Internet router SSID (wireless net-
work name) is inputted with special characters, Hangul and/or word spacing, and therefore,
it is imperative that SSID be checked when connecting.
●
PIN may be changed after installation.
●
About two minutes of booting time is required after removal of LAN cable connected to the
camera.
●
When the wireless SSID is not set with PIN, simply click OK button without inputting the PIN.
Output Power
Maximum Run Time
Battery Type
22.2 Vdc / 5200 mAh
About 40 min.
Lithium
Annex2. Extra Features
(Laser Engraver / WiFi Camera / Embedded Battery)
