19
18
3DISON H700
User Manual V.1
3DISON H700
User Manual V.1
E. Making a print with CreatorK 8
E2. How to use CreatorK 8 (Continued)
Basically, it is recommended to use SD card to save .x3g file for 3D printing for safety in
case of power outage. However, you can also print directly on your CreatorK by connecting
your computer to the printer with the USB cable without saving and using SD card.
Connecting to Printer on CreatorK 8
1. Connect your computer to the printer with the
USB cable.
2. Go Select
Machine >Connection(Serial Port)
and choose one of the detected serial ports on
the same menu bar.
NOTE : If you are using Windows 8 and want to
connect the computer and printer, please visit
Rokit Inc’s website and refer to the instruction to
install a driver to use this function.
3. After choosing your serial port, click the Con-
nect button on the menu bar.
4. Connect to your printer by clicking ”Build”
button to start your printing.
E. Making a print with CreatorK 8
1. Select
File > Open
and choose STL file you want to 3D print. Otherwise you can just drag
and drop the 3D image file into CreatorK 8.
2. When the file appears, you can adjust the size and the position of the object using the
icons below on the menu bar.
Tip. If you push “Ctrl Z” it will undo the last function. The opposite of Ctrl Z is “Ctrl Y”
which commands reverses the undo.
Mirror function
If you want to change x, y, z’s mirror, click and put the mouse pointer on the
box. Click right mouse button, and you can adjust x, y, z mirrors.
Rescale
You can adjust the size using this magnifying glass icon. By dragging up and
down mouse, you can rescale the object. And when you click on the platform,
you can rescale the object to the maximum size. If you enter one, the others
will change in proportion.
Rotation change
Using this circle arrow icon, you can rotate the object as you wish to print
out. When clicking the right mouse button, you can see the screen below.
You can rotate the object by X, Y, Z axis or by dragging it with the left mouse
button.
※ NOTE : Depending on the rotation, the quality of objects may vary. The support is created
automatically if the tilting degree of the angle is at least 45°. So this process is very important.
Position change
Using the 4 arrow icon, you can move the object. After clicking this button,
you can adjust the position using direction keyboards.(It moves 1mm per
click) And you can also move the position of the object using right button
of the mouse. When clicking right mouse button, you can see x, y, z and
center of the platform. You should choose center of platform every time
you print out.
※ NOTE : Since 3DISON is based on a FFF(Fused Filament Fabrication) method in the 3D printer,
the object piles up in layers on the plate. Therefore, if it is not fixed upon the surface, you may not
get the result you expected.
E2. How to use CreatorK 8 (Continued)
Generating G-code
