PANNORAMIC® SCAN RX 1.1
SCANNING MODES AND SETTINGS
NOVEMBER 18, 2021
74
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
Areas that will be scanned
These areas are digitized based on user settings (for example,
Fill
holes in scan area
) and not detected by the selected threshold value.
Detected sample areas that will be scanned
These areas are digitized. They are detected based on the selected
threshold value.
Detected sample areas that will not be scanned
These areas are not digitized based on their position (for example,
they are outside the selection box). They are detected by the selected
threshold value.
Marker
If
Scan area inside the marker
is selected in the Preview panel, the
preview camera detects the marker pen. The inside areas appear in
red color and will be digitized.
Areas scanned in
This color is only displayed during scanning.
Hide all layers
All the layers will be hidden / existing but not visible. The original
preview image is shown but layer information is still valid. Note, that
while this function is active, none of the other preview functions can
be selected.
NOTE:
If all layers are hidden, the scanning selection is not visible.
Separate scanning
Discrete sample areas will be scanned separately as individual slides. If
there are two samples on a slide, two separate virtual slides will be
created.
NOTE:
Discrete areas are numbered in the preview window.
You can select up to 650 discrete areas. All discrete areas are scanned,
please make sure to activate the
Remove specks
function.
