manualshive.com logo in svg

3DHISTECH PANNORAMIC SCAN RX 1.1, User Manual, Page: 39 / 165

Share
Download
3DHISTECH PANNORAMIC SCAN RX 1.1 User Manual Download Page 39

PANNORAMIC® SCAN RX 1.1 

SOFTWARE DESCRIPTION 

 

NOVEMBER 18, 2021 

38

 

FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.

 

Unload the slide by clicking 

Unload

 next to slide image and unload the magazine by 

clicking 

Unload all

 next to the rack image. Set magazine number in the value box at the 

left of the control bar, then click 

Change

 to load another magazine in the feeder. 

 

Figure 13. Slide/tray control 

If there is a lens marking at the bottom of the position preview in the magazine image, 
the preview image of that slide has already been created, and if a question mark is 
displayed the slide was not yet loaded. A slide that is loaded at the moment is highlighted 
with a blue background and outer line.

 

 Objective changer

 

 Live view is on

 

 Live view is on with the shutter closed 

 Toolbar for live images

 

Click 

 to display the toolbar for Live view. These functions are only available for the displayed 

live image (i.e., Live view is ON), but not available for camera images during digitization.

 

When in 

Normal live mode,

 images are taken with the user-specified exposure time. 

  

Notice: 

Enter full-screen live mode by pressing the F11 key. For more information, see section 

4.3 

Hotkeys

. 

 

•

 

One pixel on the monitor corresponds to one pixel on the camera.

 

•

 

The live image completely fills the display area.

 

•

 

Displays or hides the vertical and horizontal scale bars

 

•

 

Displays the magnifier window

 

•

 

Activates red marking on overexposed pixels

 

•

 

Saves the current image as BMP or JPEG file

 

 

 

Summary of Contents for PANNORAMIC SCAN RX 1.1






































































































































































Reviews:

No comments