PANNORAMIC® SCAN RX 1.1
SETTINGS AND SERVICES
NOVEMBER 18, 2021
125
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
In the
Message Call
section of the window complex messaging functions can be
defined. Here you can setup parameters of the mail server, add or remove users,
and set the message body in the
Message subject
field by entering a text for
example, to inform recipients on the location of the scanner, or the slide set you
are working with.
Click
to test settings (by sending an e-mail to the address defined in the
E-
mail To
field) after you have finished to check their relevancy before applying
them.
First, click
SMTP setup
to display the E-mail settings window, in which you can
dedicate an e-mail server through which the software sends e-mails to the
selected recipients.
Figure 116. Messenger Setup window
In the E-mail Settings window, the following parameters can be set:
•
Message Type
–
•
Host Address
•
Port
•
•
Authentication
–
User ID
and
User password
are required.
•
Secure Connection (SSL)
–
If activated, the messages will be sent through secured
connection.
•
If you have properly set messenger settings, click
Save
.
•
Click
Add new user
in the
Message Call
section of the External application call settings
window then enter
Display name
and
Address
of the recipient. Select message functions
under the
Send Message if:
field for the selected recipients (from the drop-down list at
the top of the section).
•
Click
Delete user
if you want to remove a user from the list after selection.
