3DHISTECH PANNORAMIC SCAN RX 1.1 User Manual Download

Page: 47 / 165

PANNORAMIC® SCAN RX 1.1

SOFTWARE DESCRIPTION

NOVEMBER 18, 2021

FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.

Quant settings

•

Run QuantCenter

™

: Turn this function on for automatic evaluation of the completed

digital slide by using the integrated QuantCenter

™

, right after the scanning has finished.

Warning!

Make sure that the proper Quant probe (XML file) is selected for the quantification of the
slide, as the resulting measurement data will be incorrect.

Notice:

The Pannoramic® Scanner Software for Research software is compatible with licensed

QuantCenter™ application only, otherwise the control software may close due to an error.

Click

to assign the appropriate Quant probe to the digital slide.

If the scanning of slide has finished, the progress of Quant evaluation is displayed in the
QuantCenter

™

Processing Queue window.

For further information on QuantCenter

™

, please read

QuantCenter

™

User's Guide

Other settings

•

Scan separately:

The FOV areas of the preview image will be scanned and saved

separately as discrete digital slides.

Summary of Contents for PANNORAMIC SCAN RX 1.1






































































































































































Search results

Summary of Contents for PANNORAMIC SCAN RX 1.1

Reviews:

Related manuals for PANNORAMIC SCAN RX 1.1

Brands by name

Popular brands

3DHISTECH PANNORAMIC SCAN RX 1.1, User Manual

Search results

Summary of Contents for PANNORAMIC SCAN RX 1.1

Reviews:

Related manuals for PANNORAMIC SCAN RX 1.1

Brands by name

Popular brands