background image

i

Fujitsu Mobile Color Scanner User’s Manual

Fujitsu endeavours to ensure that the information in this document is correct, but accepts
no liability for any error or omission in the same. Any procedures described in this document
for operating Fujitsu products should be read and understood by the operator before such
products are used. To ensure that Fujitsu products function without risk to safety and
health, such procedures should be strictly observed by the operator. The development of
Fujitsu products and services is continuous and published information may not be up to
date. Any particular issue of a product may contain facilities not described herein. It is
important to check the current position with Fujitsu. Specifications and statements as to
performance in this document are Fujitsu estimates intended for general guidance. They
may require adjustment in particular circumstances and should therefore not be taken as
formal offers or commitments.

Microsoft, Windows, Windows 98, Windows Me and Windows 2000 Professional are
registered trademarks of Microsoft Corporation in the United States and other countries.
Microsoft Internet Explorer is the name of a product of Microsoft Corporation of the U.S.
Other company and product names mentioned in this manual are the trademarks or
registered trademarks of their respective owners.

All Rights Reserved, Copyright

©

 2001 FUJITSU LIMITED

No part of this publication may be copied, reproduced, or translated without the prior
written consent of Fujitsu Limited. No part of this publication may be stored or transmitted
in any electronic form without the written consent of Fujitsu Limited.

Website: www.fujitsu-pc-asia.com

01_Scanner (Intro)

8/15/01, 8:34 AM

1

Summary of Contents for Mobile Color Scanner


































































Reviews: