3DGence ONE | 9
version 1.0/08.2017
4.2. When moving the printer
To ensure safety of the user and to avoid unintentional damage, follow instructions below:
• before moving, the device must be turned off and disconnected from its power source,
• the unit must be cooled down, all printing materials, movable parts and accessories must be removed from the
printer,
•
the device can be manually lifted in no other way than by its two transport handles (fig. 3) with the use of protective
gloves attached to the unit’s equipment. The device must not be held or lifted by any other construction elements,
• due to its heavy weight, the unit should not be moved by children or elderly persons.
4.3. Location of machine installation
The printer’s location should meet the following conditions:
• the machine should be operated at room temperature,
• the machine is not designed to work in dusty environments,
• working room should have proper ventilation,
• the printer should be placed on a hard, stable surface,
• the printer must not be exposed to direct sunlight,
•
around the working location, the machine should have sufficient free space, which should be measured
based on machine’s external dimensions and operating range of its axes (see fig. 4 and 5),
• the machine should be placed away from heat sources and secured against draft,
•
location of the device should have 230V/50Hz socket (110V for the US version),
• it is recommended to use UPS emergency power supplies to avoid interruption of printing in the event of
temporary power failure.
The device is powered by 230V/50Hz (AC 110V for the US version). Connect it to a power outlet with a protective
plug (grounding) to prevent electric shock in the event of malfunction of the device.
handle
handle
Fig. 3. Location of transport handles.
Summary of Contents for ONE
Page 1: ...USER MANUAL 3DGence ONE ...
Page 2: ......
