20 | 3DGence ONE
Temperature parameters and fan power can be changed during the printing process. Parameters can be manually ad-
justed for the purpose of printing process optimization. For example, strong airflow should not be used during printing
the first layer, for this reason the obtained read may be 0%. Machine code automatically starts the cooling fan at the
appropriate stage of printing. Fan settings can be changed from the MENU - Fan Speed.
LCD panel can also display information on total printing time and the amount of printed material from the initial starting of
the printer. To access this data press the arrow down button (4, Fig. 14) on the right side of the panel from the main MENU.
3.4. MENU
3DGence ONE has an extensive user interface allowing full control of the printer without connecting it to a computer. For
accessing MENU press OK button on the main panel (button 1, Fig. 14). To navigate MENU use navigation buttons on the
right side of the panel (see chapter “Main Panel” - buttons 2, 3, 4, 5, Fig. 14).
Diagram of the Menu and description of available functions are presented below. The displayed functions of menu can
change depending on the printer’s current operation mode (active or idle). Here is an example of menu in idle mode:
The symbol shown stands for choosing the option for up and down parameter regulation after pressing
OK
button.
OK button
Prepare
Tune
Calibration
Configuration
Info
Fig. 20. Main menu in idle mode.
Summary of Contents for ONE
Page 1: ...USER MANUAL 3DGence ONE ...
Page 2: ......
