3
/
24
User Manual
Thank you for purchasing TECJET printers. Hope you have a good operating experience.
In order to safely and correctly use printers, please read this manual carefully and operate as it
informs. If not, it may cause some bad damages.
All Rights Reserved by printers.
Contents
1
Safety Instructions .................................................................................................................. 3
1.1
Power
1.2
Printing Cautions
1.3
Installing Environment
1.4
Ink Placement
2
Installation Requirements
........................................................................................................
4
2.1-2.7 Body installations
2.8
Operating Panel
2.9
Media Installation
2.10
Distance between Printhead and Media
2.11
Ink Installation
2.12
Single Printhead Installation and Connecting
2.13
Ink Color Order
2.14
Carriage Board and Cable Connecting
3
About Printing Operation…
...................................................................................................
13
3.1
Start to Use
3.2
How to Calibrate
3.3
Set Calibration IP Address
3.4
How to Use Calibration Software
4
How to Install Software
.......................................................................................................
19
4.1
Step One: Decompress the Software
4.2
Step Two: Select Installation Folder
4.3
Step Three:
4.4
Step Four: Select ”Restart later” and Press”Close”
4.5
Step Five:
Summary of Contents for S Series
