3
/
24
1. Safety Instructions
1.1
Power
1)
Requirements: 50Hz, 220V, AC (±10%), the printing power consumption is 120W,
Maximum machine power consumption is 1920W, pre-heating 300W, post-heating
300w, outside heating 1200W. In different countries and regions, it may use 110V or
220V AC.
2)
All devices should be connected to a properly grounded outlet, please avoid socket with
photocopiers or air conditioning system.
3)
Avoid using wall switches or automatic timers controlled outlet.
4)
Keep your computer system away from potential sources of EMI, such as speakers or
cordless telephone.
5)
Do not use the damaged or worn Power cable.
6)
If please use the attached power cable, make sure that insert the extra total amps of power
line devices. Use an earth wire to be safe.
7)
Do not try to fix the printer yourselves. Any problems please consult the senior technician
first.
8)
All the cables are not allowed to be pulled out when the power is on, or will cause the
damages of the main board.
1.2
Printing Cautions
1)
When turn on the printer, do not move the print head, or the printer may be
damaged.
2)
Always use the power switch to turn off the printing, but when the button is
pressed, the power supply will be cut off. Before the power is cut off, do not
unplug the printerʹs plug or cable.
3)
Before moving the printer, ensure that the print head in the initial position, and
fixed.
4)
Do not attempt to remove the dryer or electric control cabinet.
5)
Do not remove any other closed or open cover or plugs.
6)
Do not insert any objects in the slot of the printer.
7)
Do not touch the printer drying systemʹs interior cover. Even after power is
disconnected interior surface may still be very hot.
8)
When contact material drying channel, special care should be taken.
9)
Keep clothes and all parts of the body away from the moving parts of the
printer.
10)
Do not wear necklaces, bracelets and other hanging articles.
11)
Be careful and not to let your sleeve or glove is entangled by moving parts of the
printer.
12)
During printing, do not touch the gears or the reel.
1.3
Installing Environment
To keep Tecjet printers keep smooth operation in a long time, Tecjet printers should be kept in
Summary of Contents for S Series
