manualshive.com logo in svg

3D Systems ProX 500, User Manual, Page: 19 / 67

Share
Download
3D Systems ProX 500 User Manual Download Page 19

3D Systems, Inc.

19

SAFETY SYMBOLS AND DEFINITIONS

The following safety labels are posted at various points on the machine to indicate potentially hazardous conditions:

HOT SURFACES HAZARD: There are surfaces and materials in the vicinity that may be hot and could cause severe 
burns .

LASER RADIATION HAZARD: Invisible laser radiation is accessible in the vicinity of this sign or behind the access 
panel . Direct and scattered radiation can cause severe burns and blindness . Access panels are for service only and 

should be opened only by certified service personnel.

ELECTRIC SHOCK HAZARD: High voltage electricity is accessible in the vicinity of this sign or behind the access 
panel . High voltage can cause severe burns or death . Access panels are for service only and should be opened only 

by certified service personnel or trained maintenance personnel.

CAUTION: Indicates something may happen that could cause loss of data, damage to equipment, or personal injury .

CRUSH HAZARD: Injury or death from crushing weight .

NOTCHED BELT ENTANGLEMENT: Injury or death from entanglement in notched pulley drive belt .

Summary of Contents for ProX 500




































































Reviews:

No comments