3D Systems projet mjp 2500, User Manual, Page: 15 / 92

USER INTERFACE
User Interface
The User Interface is located on the top of the printer to the right. There are five main screens that contain sub menus that allow the user to perform a variety of
functions to control the printer. These five screens and their menus are:
Status Tab (A)
The first tab on the UI. The following features are accessed under the Status Tab (A). Refer to 1-7 for information that appears on this screen.
Access Platform - Pressing this button provides access to the print platform so it can be removed from the printer. 1.
Start Print Job - Select to start the next print job in the print queue. 2.
Refresh Print Queue - Refreshes the printer queue with the most recent jobs. 3.
Current Layer Info - This area displays the current layer information. 4.
Print Sender - This displays the ID of the person that sent the job. 5.
Printer State - This area identifies what state the printer is in at any given time. See below for the various Printer States. 6.
Ready - Printer ready to accept print jobs.
Printing - Printer is printing a job
Preparing Build - Printer is setting up to begin printing
Busy - Printer is performing maintenance
Standby - Printer is in a low power state
Paused - Current print is paused and can be resumed by selecting the button
Complete - Current print is completed and the part can be removed from the printer
Aborted - Current print was aborted
Warming Up - Printer or material cartridges are warming up to a Ready state
Waiting - Chamber Cooling Down - Printer is waiting for the build chamber to cool down before continuing printing
Initializing - Printer is powering on and going through initialization
Recovery - Printer has a fault and is attempting recovery
Error - Printer is in an Error state and may require a service call
Waste Bag Usage - This is an indicator of how full the waste bag is. 7.
Prints Tab (B)
Opens up the Print Queue (1) to manage the print queue of jobs for the printer.