3D Systems, Inc.
3
p/n: 15-D99, rev. C
2
TYPES OF INSTALLATION
The DMP Flex 350 is a Direct Metal Printer with an expected service life of 10 years. It can be installed in two configurations,
compact or split. For either type of installation the process filter cannot be installed in a separate room and must always be
installed adjacent to the DMP Flex 350 printer.
2.1 Compact Setup
A compact setup places all of the equipment in one room. With this configuration (see images below), the blower, vacuum
pump and chiller are located directly behind the DMP Flex 350. All piping and connections are supplied by 3D Systems.
Front view
Top view
