3D perception
C
OMPACT
V
IEW
SX25+
Revision 3
User Manual
27
16.5
Utilities Sub-menu
FOR ALL
information
Displays information about the source and projector
status
OSD
Turn the On Screen Display on (display) or off (hide)
during source scan.
OSD timeout
Defines how long OSD is displayed after last key
action before it disappears from the screen.
OSD background
Select background mode, whether translucent or
opaque.
reset
Resets the projector to its basic settings. All
parameters available in the various menus are reset
to their factory values.
Note: Control mode will automatically be reset to
RS232 even if the projector is a type SX25+I. A
power cycle is needed for the projector to detect
the presence of a GCM card and to select the
RIMI mode
lamp reset
Reset lamp after lamp change. Do not reset lamp
counter unless the lamp has been replaced with an
original new lamp.
service menu
For service personnel only. A special service code is
needed to access internal calibration controls and
status information. Not accessible to the user.
test image
Applies a fixed test image for set-up purposes
SYSTEM INFORMATION
