3D perception
C
OMPACT
V
IEW
SX25+
Revision 3
User Manual
35
Inputs
2 VGA 15 pin female HD-DSUB analog RGBHV
1 DVI-D female digital RGB
1 Component video female 3 x RCA/phono
1 S-video female 4 pin mini-DIN
1 C-video female RCA/phono
2 Audio 3.5 mm female stereo jack
1 RS 232 9 pin female DSUB (control, firmware update)
1 USB-B female (control, firmware update)
1 LAN RJ-45 female (control, firmware update)
1 Remote Control 3.5 mm female stereo jack
Outputs
1 VGA Monitor 15 pin female HD-DSUB analog RGBHV
1 Audio 3.5 mm female stereo jack
1 RS 232 9 pin male DSUB
Power
90-260 VAC, 50-60 Hz, 350W
Conformance
CE, FCC A, CSA(C,US)
Temperature operating
0-40°C / 32-104°F, 0-1500 m / 0-4950 ft
0-35°C / 32-95°F, 1500-3000 m / 4950-9900 ft
Temperature storage
-20 - 60°C / -4 - 140°F
Humidity operating
20-90% RH, non-condensing
Humidity storage
10-95% RH, non-condensing
20.2
GCM Specifications
These specifications apply to the CompactView SX25+I only
Non-linear image mapping from 50% to 200 %
Total latency typically 250 line period
Automatic and manual options
Up to 100 geometrical control points (compliant with curved
screens requirements)
Warping
Up to 5th order approximation between geometrical control points
Multisided non-linear blending from 2% to 100% of total image
Alpha adjustable from 0 to 4 across overlapped areas
Gamma adjustable from 0.25 to 4 in overlapped areas
Soft Edge Blending
Up to 5 geometrical control points (compliant with curved screens
requirements)
Individual RGB adjustments of ± 20% in addition to native
adjustment capabilities
Primary Colour Calibration (For ‘E’ models with CompactUTM zer0
only)
Colour
Input Offset and Input Gain adjustments
Gamma
Individual RGB adjustments from 0.25 to 4 in addition to native
adjustment capabilities
Specifications are subject to change without prior notice. All values may vary up to +/- 20%.
