3D perception
C
OMPACT
V
IEW
SX25+
Revision 3
User Manual
4
4.
S
AFETY
& W
ARNINGS
This user manual contains important information regarding safety precautions and the set-up
and use of the projector. Please read the manual carefully before you operate the projector.
4.1
Safety
This device complies with relevant safety regulations for data processing equipment for use in
an office environment. Before using the projector for the first time, please read the safety and
warning instructions thoroughly.
4.2
Warnings
Always use 3-prong power cord to ensure proper grounding of the unit. Never use 2-prong
power cords, this is dangerous and could lead to electrical shock.
Never open the unit. The projector contains no user serviceable parts. Refer all repairs to
qualified personnel only.
Make sure that no objects enter into the vents and openings of the unit.
Do not spill any liquids on the projector or into the vents or openings of the unit.
Always remove the lens cap before switching on the projector. If the lens cap is not removed, it
may melt due to the high energy light emitted through the lens. Melting the lens cap may
permanently damage the surface of the projection lens.
Do not look into the projection lens when the projector is switched on. The strong light may
permanently damage your eyesight.
Do not look into the laser beam when activated on the remote control. Laser light may
permanently damage your eyesight.
Do not point the laser beam at people.
Only place the projector on a stable surface, or mount it securely using an approved ceiling-
mount.
Do not drop the projector.
Always allow sufficient airflow through the projector. Never block any of the air vents. Never
cover the unit in any way while it is operation. Allow sufficient distance to walls and ceilings in
order to avoid overheating. Minimum safety distance to any side of the unit is 50 cm (20") in any
direction.
CAUTION! Hot air is exhausted from the side vent. Do not place objects that are sensitive to
heat nearer than 50cm (20") to the exhaust vent.
