3D perception
C
OMPACT
V
IEW
SX25+
Revision 3
User Manual
26
16.4
Set Up Sub-menu
keystone V
Adjust vertical keystone correction. Compensates for
the geometrical distortion of the projected image
resulting from tilting the projector to shoot higher up
on the wall.
keystone H
Adjust horizontal keystone correction. Compensates
for the geometrical distortion of the projected image
resulting from shooting the image at an angle
sideways on the screen.
DPMS
Activate/deactivate DPMS (Display Power
Management Signaling). When DPMS is on, the
projector will switch off following the powering off or
disconnection of the signal source. The projector will
switch back on when the signal source is reactivated.
source scan
Switches source scan on and off. With source scan
on, the projector will search for another source if the
current source is disconnected or switched off.
With source scan off, the projector will remain at the
selected source input even if the source is switched
off or disconnected.
orientation
Select between desktop front, desktop rear, ceiling
front and ceiling rear mode. The image will be flipped
and reversed accordingly.
OSD
Select the required position on the OSD (On Screen
Display)
language
Select between languages
RGB video
Selects RGB video on the component video input
(YPbPr). Requires composite sync connected to the
composite video input.
FOR ALL
