3D perception
C
OMPACT
V
IEW
SX25+
Revision 3
User Manual
21
15.
U
SING THE
P
ROJECTOR
After set-up, switch on all equipment.
To switch the projector on, firmly press the POWER button on the keypad or the remote control.
The STATUS indicator will turn from yellow to green when the projector is switched on.
When only one source is connected, the projector will auto-detect the source. If more sources
are connected, the projector will display the source with the highest priority according to the
following list:
•
VGA 1
•
VGA 2
•
DVI
•
Component
•
Super video
•
Composite video
Sound will follow the selected source. Select between the sources by pressing the SOURCE
buttons on the keypad or the remote control. Only sources that are active will be displayed.
If no source is active, the message “searching” will appear on the screen.
If no source is active for a long time, the projector will go into the standby mode. The projector
will be switched on if at least one source is activated/re-activated. Can be disabled in the menu.
See DPMS in the set up sub menu.
To switch the projector off, firmly press the POWER button on the keypad or the remote control
twice. The STATUS indicator will turn from green to flashing yellow, then to yellow when
switched off.
