3D perception
C
OMPACT
V
IEW
SX25+
Revision 3
User Manual
14
11.
S
ET
-
UP
Before any set-up, switch off all equipment.
11.1
Set-up computer
The projector may be connected to up to three computer sources simultaneously, using the
VGA and DVI inputs.
The VGA interface is analog and may cause some noise in the projected image, depending on
the signal quality from the VGA graphics card in the computer and cabling.
The DVI (Digital Visual Interface) interface is all digital and will yield a projected image with very
low noise.
Connect the USB cable to allow for remote mouse control.
Connect the power cord.
Connect the RS232 interface to allow for individual or global control of multiple units in a daisy
chain configuration.
Connect the LAN connector for individual control and monitoring of multiple projectors over
LAN.
