3D Histech Pannoramic MIDI 1.16 User Manual Download Page 86

Page: 86 / 127

Pannoramic MIDI 1.16 User’s Guide

4 Software Description

4.5.5 Service tab

Figure 51 – Service tab

This tab contains control and maintenance functions.

Emergency Manual Slide Removal Position

The specimen holder will be moved to a position where the slide can be removed manually
after opening the cover (see section

5.3.1 Opening the protective cover

Slide Removed Manually

Click this button to notify the software that you have removed the slide manually.

Show images during scanning

If you select this option, you will be able to see the currently scanned image field during

scanning in the live image display field. This slows down digitization process and should be
activated only with purpose.

January 16, 2013 - Rev 1

3DHISTECH Ltd.

86(127)

Summary of Contents for Pannoramic MIDI 1.16
































































































































Search results

Summary of Contents for Pannoramic MIDI 1.16

Reviews:

3D Histech Pannoramic MIDI 1.16, User Manual, Page: 86 / 127

Search results

Summary of Contents for Pannoramic MIDI 1.16

Reviews: