3D Histech Pannoramic MIDI 1.16 User Manual Download Page 17

Page: 17 / 127

Pannoramic MIDI 1.16 User’s Guide

1 Product Description

Camera adapters

0.63× adapter

1× adapter

Warning!

The installation of the cameras in Pannoramic MIDI must be carried out
by trained professionals!

In any other case the warranty will be automatically voided. The
supplier or distributor is not liable for any damages caused by an

installation carried out by an unauthorized person.

Base Unit options

•

Pannoramic MIDI Basic Scan Option / Fast Option – base unit equipped with Stingray

or CIS

cameras for Brightfield scanning (no fluorescent accessories included)

•

Pannoramic MIDI Basic Fluorescence Option – base unit completely equipped with Stingray
or CIS VCC-F52U25CL

camera for Brightfield scanning; with AxioCam camera and HXP 120

illuminator, trigger cable and filters for fluorescence scanning

•

Pannoramic MIDI Advanced Fluorescence Option – base unit completely equipped with CIS
VCC-F52U25CL

camera for Brightfield scanning, and with pco.edge camera and Lumencor

fluorescence illuminator, trigger cable and filters for fluorescence scanning

NOTE:

In case Lumencor light source is ordered, the custom light source and filter modules

can be variable. For more information, please contact 3DHISTECH customer service.

Objectives

•

Carl Zeiss Plan-Apochromat 20×/NA 0.8

•

Carl Zeiss Plan-Apochromat 40× Corr/NA 0.95

January 16, 2013 - Rev 1

3DHISTECH Ltd.

17(127)

Summary of Contents for Pannoramic MIDI 1.16
































































































































Search results

Summary of Contents for Pannoramic MIDI 1.16

Reviews:

3D Histech Pannoramic MIDI 1.16, User Manual, Page: 17 / 127

Search results

Summary of Contents for Pannoramic MIDI 1.16

Reviews: