Configuring IBM Host Connectivity
5-7
10 In the Network Setup message window, click
OK
.
The Windows Setup window displays the following
message:
You need to quit Windows and restart your
computer so that changes you made will take
effect. Do not press CTRL+ALT+DEL to restart
your computer--this may cause you to lose work.
Restart the computer now?
11 In the Windows Setup message window, click
Restart Computer
.
This completes the procedure for adding the Microsoft
MS-DLC network protocol to the Windows for Workgroups
Add Network Protocol list for the 3C359 NIC.
After adding the network protocol, install the host
connectivity applications (such as client access and
emulator applications) that are appropriate for your
environment.
Adding the 32-Bit DLC Network Protocol for Windows 95
Follow the steps in this section to add the Microsoft 32-bit
DLC network protocol to the Windows 95 Network Protocols
list for the 3C359 NIC. The 32-bit DLC protocol is required for
connectivity between your PC and an IBM host computer.
Before proceeding, make sure that you have the Microsoft
32-bit DLC network protocol available. If you are using
Windows 95 version 950 or 950a (the “retail” version), you
must download the 32-bit DLC protocol from the Microsoft
Web site to a temporary storage location on your PC’s hard
disk or on a diskette. Windows 95 version 950b, OSR2,
includes the 32-bit DLC protocol.
1 On the Windows 95 desktop, double-click the
My Computer
icon.
2 Double-click the
Control Panel
icon.
3 Double-click the
Network
icon.
4 In the Network window, select
3Com TokenLink
Velocity XL PCI Adapter
in the Configuration tab.
Click
Add
.
Book Page 7 Saturday, November 1, 1997 3:13 PM
